|
DRYING SYSTEMS FOR FILM AND RIGID MATERIALS
UEF SERIES
|
MODELS |
UEF250 |
UEF500 |
UEF1000 |
|
Battery heating stages (quantity) |
1 |
2 |
3 |
|
Heating battery power (kW) |
30 |
60 |
90 |
|
Rotary valve motor power (kW) |
1,1 |
1,1 |
1,1 |
|
Blower fan/exhauster power (kW) |
3 |
5,5 |
7,5 |
|
Transport blower fan power (kW) |
1,5 |
3 |
5,5 |
The drying process
is reached through hot air circulation and humid air extraction,
with final cooling of the dried material.
Each unit is
composed of:
-
Discharge
cyclone and special storage silo, made of sheet steel, located
on a dosing rotary valve, driven by a variable speed gear box.
-
Hot air
generator unit, completely automatic, provided with independent
electric heating elements, that assure a continuous production
of hot, clean and dry air. Its design has been studied to
guarantee the highest heating efficiency, with a very low energy
cost.
-
Centrifugal-type blower fan/exhauster with axial suction and
open impeller, connected to a rotary valve by a conveyor. It is
provided with a thermocouple that adjusts the right mixture of
air and material to be sent to the drying system.
-
Drying tower
with special zigzag shape to prevent material from sticking,
with inspection window and piping system in zinc-coated steel.
It has a spiral shape to prolong material contact with hot air.
-
Cooling tower
provided with cyclone to separate the hot air from the material
and with electric blower fan to transport the material to the
discharging section.
UPEF SERIES
|
MODELS |
UPEF500 |
UPEF1000 |
|
Battery heating
stages (quantity) |
1 |
2 |
|
Heating battery
power (kW) |
30 |
60 |
The drying process
is reached through hot air and material circulation.
Each unit is
composed of:
-
Hot air
generator unit, completely automatic, provided with an
independent electric heating element, that assures a continuous
production of hot, clean and dry air. Its design has been
studied to guarantee the highest heating efficiency, with a very
low energy cost.
-
Drying system
with piping system in zinc-coated steel. It has a spiral shape
to prolong material contact with hot air.
RG SERIES
|
MODELS |
RG250 |
RG500 |
RG1000 |
|
Battery heating
stages (quantity) |
1 |
2 |
3 |
|
Heating battery
power (kW) |
30 |
60 |
90 |
|
Rotary valve
motor power (kW) |
1,1 |
1,1 |
1,1 |
|
Blower
fan/exhauster power (kW) |
3 |
5,5 |
7,5 |
|
Transport blower
fan power (kW) |
1,5 |
3 |
5,5 |
The drying process
is reached through hot air circulation and humid air extraction,
with final cooling of the dried material.
Each unit is
composed of:
-
Discharge
cyclone and special storage silo, made of sheet steel, located
on a dosing rotary valve, driven by a variable speed gear box.
-
Hot air
generator unit, completely automatic, provided with independent
electric heating elements, that assure a continuous production
of hot, clean and dry air. Its design has been studied to
guarantee the highest heating efficiency, with a very low energy
cost.
-
Centrifugal-type blower fan/exhauster with axial suction and
open impeller, connected to a rotary valve by a conveyor. It is
provided with a thermocouple that adjusts the right mixture of
air and material to be sent to the drying system.
-
Drying system
with piping system in zinc-coated steel. It has a spiral shape
to prolong material contact with hot air.
-
Cooling tower
provided with cyclone to separate the hot air from the material
and with electric blower fan to transport the material to the
discharging section.
PDU SERIES
|
MODELS |
PDU300 |
PDU500 |
PDU1000 |
|
Heating power (kW) |
18 |
36 |
50 |
|
Centrifuge motor power (kW) |
4 |
5,5 |
7,5 |
|
Auger motor power (kW) |
0,55 |
0,75 |
1,5 |
|
Blower fan motor power (kW) |
0,37 |
0,5 |
1,5 |
|
Blower
fan/exhauster power
(kW) |
0,26 |
0,26 |
0,26 |
|
Total installed power (kW) |
23 |
43 |
60 |
|
Output (kg/h) |
350 |
1000 |
1500 |
This
drying unit is designed to be employed in drying pellets or rigid
ground plastics.
The
unit is characterised by a mechanic/thermal action. From the loading
hopper the material enters the horizontal feeding auger; through the
auger bored basket, moving forward toward the centrifuge, part of
material water is discharged.
In the vertical centrifuge the product suffers a strong dynamic
action which, combined with a hot air flux, completes total moisture
elimination.
The equipment is fixed on wheels for easy travel and is composed of:
-
Water collection tank
-
Transport and dewatering auger equipped with collection hopper
-
Three-stage sound-proofed vertical centrifuge for water/pellet
separation
-
Electric battery for hot air production
-
Electro-blowing fan for hot air transport through the centrifuge
-
Sound-proof discharge cyclone with moist air extraction
All
metallic parts in contact with water are made of
stainless steel.
Available on request:
|
