AGGLOMERATORS A
|
MODELS |
A 45 |
A 60 |
A 80 |
A 100 |
A 120 |
|
TECHNICAL DATA |
|
Ideal for |
LDPE |
LDPE
HDPE |
LDPE
HDPE
PP |
LDPE
HDPE
PP |
LDPE
HDPE
PP |
|
Output (Kg/h) |
50 |
120 |
240 |
600 |
1000 |
|
Installed power (kW) |
11,5 |
30,5 |
55,5 |
111,5 |
203,5 |
|
Working chamber diameter (mm) |
450 |
600 |
800 |
1000 |
1200 |
|
EQUIPMENT
X not available; O optional; I included |
|
Control panel and power unit |
I |
I |
I |
I |
I |
|
Dust and dump aspiration system |
I |
I |
I |
I |
I |
|
Hopper for discharged material |
I |
I |
X |
X |
X |
|
Tank for discharged material equipped with extracting auger |
X |
X |
O |
O |
O |
|
Mezzanine for operator with ladder |
X |
X |
I |
I |
I |
|
Stocking material floor |
X |
X |
O |
O |
O |
|
Loading band |
X |
X |
O |
O |
O |
|
Pneumatic transport connected to the tank |
O |
O |
O |
O |
O |
P.R.T. Service &
Innovation A-series machines deal with the grinding and
agglomeration of laminates, fibres and thermoplastic films.
The operating
principle is based on the transformation of mechanical energy, used
for grinding the material, into the thermal energy needed for
plastification.
The working process
takes place in cycles and is characterised by the following phases:
-Feeding - manual
or using a belt
-Grinding-plastification
using a disk wheel, opposed by fixed blades, located on the lower
perimeter of the working chamber
-Interruption of
plastification through the introduction of water which determines
the disintegration of the melted mass
-Unloading through
a pneumatically-controlled opening
The resulting
product comes in the form of densified macroparticles which are
humidity-free and can be moved easily.
